The Firewood Cutter, also known as the Lumber Conveyor, is a game-changer for anyone looking to sell and cut firewood in My Winter Car. Imagine the satisfaction of turning logs into firewood and cash!
However, you can’t operate this mighty tool alone; you’ll need to hook it up to your tractor. Don’t worry, though. With a bit of guidance, you’ll master the art of woodcutting in no time.
How to Use the Lumber Conveyor in My Winter Car
Your first step is to connect the Cutter to the Kekmet tractor. Unfortunately, you can’t move the Lumber Conveyor without attaching it to your tractor. So, drive your Kekmet close to the Conveyor, ensuring the distance is minimal. If you’re too far away, you risk misalignment and dropping logs.
Next, locate the rear hitch lever on the right side of the Kekmet. Use this lever to lower the attachment arms. Once they’re down, hop out of the tractor and connect them to the Cutter. If aligned right, it should click into place effortlessly.
Now, it’s time to get moving! Find the PTO lever located on the left side of the steering wheel. Engaging it activates the drive shaft and Conveyor. If you crank up the RPM, you’ll finish cutting faster, but remember, it might not allow for longer cutting sessions.
How to Cut the Firewood in My Winter Car
With everything set up, it’s time to cut some wood! Grab a log from your pile and place it in the Cutter’s slot. The magic happens automatically—the log will split into smaller pieces, very much dependent on how fast you set the RPM. The wicked Conveyor will send the freshly cut firewood right into your trailer, so remember to attach that too!
What is the best way to connect the Lumber Conveyor to the tractor?
Approach the Conveyor closely with your tractor and lower the attachment arms using the rear hitch lever. Align them properly for a secure connection.
How do I increase the Cutting speed?
To speed up the cutting process, simply adjust the RPM using the PTO lever. Keep in mind that higher RPMs can shorten your cutting session.
Can I use the Conveyor without a tractor?
No, the Lumber Conveyor requires a tractor to operate. Always attach it securely to your Kekmet for safe and effective use.
What happens if I’m too far from the Conveyor?
If you’re too far away, logs may fall during cutting due to misalignment. Always make sure to position your tractor as close as possible.
How do the logs get into the trailer?
The Conveyor automatically places the split firewood directly into your attached trailer, simplifying the process even further.
If you’re eager to tackle cold winter nights with your newfound firewood skills, now is the time to dive in and practice cutting! Have you tried using the Firewood Cutter yet?